What a flooring job includes

The price on the quote includes taking the old floor out, prepping the subfloor, and installing the new one.

  • Removal. The old floor comes out before the new one is measured.
  • Subfloor. Leveling, repair, and a moisture check on concrete.
  • Luxury vinyl. Waterproof plank for kitchens, baths, and basements.
  • Hardwood. Living rooms, bedrooms, and dining rooms, where it can be refinished.
  • Tile. Porcelain and ceramic where water and wear are the issue.
  • Carpet. Bedrooms and stairs, with the pad included.

Why the material has to match the room

The wrong floor in a wet room fails no matter how carefully it is installed.

Vinyl where water wins

Luxury vinyl is waterproof. It is the floor we use in basements, kitchens, and baths. Installed, it often runs $4–$8 per square foot.

Hardwood where it can last

Solid and engineered hardwood belong in dry rooms. Installed, it often runs $8–$15 per square foot, and it can be refinished.

Tile where you want it hard

Porcelain and ceramic for floors that take water and wear. Installed, often $6–$15 per square foot.

Prep is part of the job

Squeaks, dips, and a damp slab get fixed before the finish floor. That work is on the quote, not a surprise.

How a flooring project runs

Furniture moves out, the old floor comes up, the subfloor is corrected, then the new floor goes down.

Room by room Subfloor first One contractor

Three floors we install most

Pick the room first. The material follows from moisture, pets, and how long you want it to last.

Hardwood

The floor you can refinish.

  • Living rooms, bedrooms, dining rooms
  • Not for basements or wet rooms
  • Often $8–$15 per square foot installed
  • Can be sanded and finished again

Tile

Hard, waterproof, and permanent.

  • Baths, entries, and kitchens
  • Porcelain or ceramic
  • Often $6–$15 per square foot installed
  • Heated floors when you want them

A typical 200 square foot room often lands between $600 and $3,000 installed, depending on the material and the subfloor.

Book a walkthrough

Questions we answer on the walkthrough

How much does new flooring cost?

Installed, carpet is often $3–$7 per square foot, luxury vinyl $4–$8, hardwood $8–$15, and tile $6–$15. A 200 square foot room is commonly $600–$3,000. Stairs, transitions, and heavy subfloor repair are extra.

What belongs in a kitchen or bathroom?

Luxury vinyl or porcelain. Both are waterproof. Hardwood in a wet room cups and stains. Vinyl is often $4–$8 per square foot installed, porcelain $6–$15.

What belongs in a basement?

Luxury vinyl, or porcelain if you want tile. Hardwood and laminate swell when the slab is damp. We test the concrete and install a moisture barrier first.

LVP or hardwood?

Vinyl for moisture, pets, and a lower price. Hardwood for dry rooms where you want a floor that can be refinished and holds more resale value.

Do you repair the subfloor?

Yes. Leveling, soft spots, and moisture prep happen before the new floor. That work is part of the written scope.

What is the best floor for pets and kids?

Luxury vinyl. It is waterproof, has a wear layer, and cleans up. Carpet holds stains and odor. Laminate swells if it gets wet.

Where we install floors

Kankakee County, the south suburbs, and Will County.

Kankakee County

Kankakee, Bourbonnais, Bradley, Manteno, Momence, Herscher, St. Anne, Grant Park, Aroma Park

South suburbs

Orland Park, Frankfort, Tinley Park, New Lenox, Mokena, Homer Glen, Lockport, Joliet, Oak Forest

Will County

Crete, Monee, Peotone, Beecher, Manhattan, Wilmington, Channahon

Tell us which rooms need a new floor.

A free in-home look, then a written scope. 30+ years, licensed and insured.

In-home estimate Written scope Licensed & insured