Quantities
Standard non-load-bearing interior wall framing, up to 9 ft high, 2×4 studs at required spacing, top/bottom plates, standard lumber, fasteners, layout, ordinary blocking, approximately 10% waste, material handling and normal mobilization. Counted doors include the opening plus supply, hang, and finish paint on the door and jamb unless you choose RO only or HO-supplied install. Drywall, electrical, insulation and wall/ceiling paint are excluded unless separately selected.
Each counted door includes the rough opening (header, jacks) plus the door package. Turnkey is the door unit, hang, standard paint-grade casing both sides, a hardware allowance, and finish paint on the door (both sides) and jamb. Switch to RO only if you are not supplying or hanging the door.
Framing options & adders
Pocket RO is framing only. Installing a homeowner-supplied pocket-door kit is a separate +$450 line.
Existing wall demo (framing only)
Framing-only demo at $5/LF. Drywall demo/patch belongs in the Drywall calculator. Utilities are not auto-priced — walkthrough / other calculators as needed.
Size, how many, and swing. Painted is the usual finish.
Each old door is pulled. One to three is the small debris haul. Four or more is the medium haul.
Stand on the side of the door that swings away from you — the side you push to open it.
Left-hand
Hinges on your left
Right-hand
Hinges on your right
Closet bifolds and bypass doors do not use a swing. Sizes are the 6′8″ (80″) door.
Painted is the usual finish. Stained is sand, stain, and a clear coat on baseboard, casing, and crown.
Supply and install is prep only until you pick a finish. Remove and replace includes the finish. Wide craftsman profiles are a manual upgrade.
Standard $75/location (TV, cabinet, accessory). Heavy $125 (grab bar, wall-mounted vanity, large fixture). Specialty structural blocking is manual.
Shelf + rod is $25/LF all-in with a $350 closet minimum. Reach-in package is $650 (one shelf, rod, supports, paint-grade/white). Custom closets belong in cabinetry.
